MIL-I-46390(MU)
tion lot size, formation, and presentation of
supplier may utilize his own or any other
lots shall be in accordance with "Presenta-
inspection facilities and services acceptable
tion of Lots and Drawing of Samples"
to the Government. Inspection records of
specified in Standard MIL-STD-105.
the examinations and tests shall be kept
complete and available to the Government
as specified in the contract or order. The
4.2.2 Examination and tests. Compo
Government reserves the right to perform
nents and subassemblies shall be inspected
any of the inspections set forth in the speci-
in accordance with the inspection provisions
fication where such inspections are deemed
contained in Specification MIL-F-13926.
necessary to assure supplies and services
Examinations and tests related to Section
conform to prescribed requirements.
3 herein shall be performed on a defect
(individual characteristic) basis in accord-
4.1.1 General provisions. The quality
ance with Standard MIL-STD-105, and the
assurance provisions of this specification
inspection level and sampling plans specified
and of other documents referenced herein
form the basis for inspection to be per-
in Table I titled "Classification of Defects".
formed by the supplier. Inspection shall
Examinations and tests for Packaging,
be in accordance with the requirements of
Packing and Marking shall be in accordance
Specification MIL-I-45208 and the com-
with Specification MIL-P-14232 and Sec-
ponent inspection requirements of Specifica-
tion 5 herein. The tabulated classification
tion MIL-F-13926. Definitions of inspec-
of defects shall constitute the minimum in-
tion terms not otherwise defined herein
spection to be performed by the supplier
shall be as listed in Standard MIL-STD-
109.
prior to Government acceptance or rejection
by lot. The Government reserves the right
4.2 Inspection provisions.
to inspect for any applicable requirement,
and to reject individual non-conforming
4.2.1 Inspection lot, Unless otherwise
items.
specified by the contracting officer, inspec-
TABLE I. Classification of defects
Use Inspection Level II of Table III-A with
Sampling Plan Table XV-A of Standard MIL-STD-106
Critical: None.
Requirement Test procedure
Major: AQL 1.0% Defective.
4.6.2.1
101. Reset button operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6.1
4.5.22
3.6.2
102. Relay K 25 & K 30 operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..""....-
4.5.2.4.1
103. Zero position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.2.1
4.5.2.8
104. Relay K26 operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.9
4.5.2.4
105. Relay K27 operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.6.4
4.6.2.4.2
106. Stepping Switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.5
4.6.2.6
107. Stepping switch coil and interrupter operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6.5.1
4.6.2.5
3.6.2
Sequential firing operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108.
4.6.2.6
3.6.5.3
109. Zero reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... ... . ... ... . ... ... . . . ... . . . ... ... . ... ... . ... ... . . . ... . . . ..
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business